鸿浩电力设备有限公司

Summary

HSGN-12 series fully enclosed and fully insulated inflatable ring network switchgear is SF6 gas insulated metal common box type enclosed switchgear, which can be composed of load switch unit, load switch fuse combination unit, vacuum circuit breaker unit and bus incoming unit. Using a series of advanced technology and materials, it has excellent electrical and mechanical properties, small size, easy to install, easy to operate, no maintenance, and flexible combination. Clear and intuitive design ensures simple and direct operation. The inertial line has large connection capacity and is suitable for various connection systems.

Unit definition

Product features

Operation safety:

Through the following security measures, we can provide users with special security.

Integrated three position load switch

The circuit breaker adopts the load switch instead of the isolating switch, which is more safe and reliable. The fully enclosed design at the primary side provides protection for accidental contact. The mechanical interlocking live display meeting the five prevention requirements can provide live indication for the incoming and outgoing lines, and the operation is reliable: the fully enclosed design, all 10kV switches and bus charged bodies are sealed in an air box welded with 3mm stainless steel plate; equipped with silicone rubber cable plug, The cable head is fully insulated and sealed, so that it is not affected by dust, humidity, small animals and other external environment. The spring energy storage operating mechanism can be operated manually or electrically. The analog line diagram of the panel provides switch position indication. The cabinet body is made of zinc plate, and the surface is electrostatically sprayed to enhance the anti-corrosion performance. The pressure gauge monitors the safe pressure range of SF6 gas in the box.

Economy:

Maintenance free

Highly reliable

The scheme is flexible

There are three ways to enter the line, which can realize left, right, up or forward line

There are many combination ways, and each unit can realize arbitrary combination

With insulated bus, front and rear or left and right parallel cabinets can be realized

Flexible design

It is widely used

Performance indication

SF6 gas pressure: 1.4bar absolute pressure at 20 ° C

Annual gas leakage rate: 0.2% / year

Protection grade: p67

Thickness of stainless steel in air chamber: 3mm

Bus

Busbar in switchgear: 400mm Cu

Switchgear grounding bus: 150mmcu

Color

Front panel of switch cabinet: ral7012

Side plate and cable room front cover ral7035

Environmental conditions for normal operation

High temperature 40 ° C; low temperature - 40 ° C; average relative humidity ≤ 95%; altitude ≤ 2000m

Meet the standard

GB/T11022 、GB3906、GB1985、GB16926、GB380、GB1984、GB3309

IEC60056、IEC60129、IEC60265、IEC60298、IEC60420、IEC60694

Note: (1) it depends on the current rating of the fuse.

Design description

SM6-12The fully enclosed and fully insulated inflatable ring network switchgear is installed on a galvanized plate frame. The switch unit is in SF6 gas box, and the air box is made of corrosion-resistant and non magnetic 3mm thick stainless steel plate. SF6 gas tank is a "sealing pressure system" which can be operated for 20 years in normal working environment. The pressure of SF6 gas is 0.015-0.04mpa when it is in normal operation

The gas tank is equipped with pressure release device, and when the pressure is too high, it is ensured that the gas can be released from the bottom or the rear.

Truly meet the needs of the cable room and cable connection

A total of 15 standard assembly combinations are provided

Each module of sm6-12 non expansion standard modular unit cabinet has the following configuration

Standard configuration and characteristics of "cable connection module without grounding knife" in D cabinet lifting module

Standard configuration and characteristics of "load switch module" in cabinet c-load switch module

The standard configuration and characteristics of "load switch fuse combiner module" in cabinet f-load switch fuse combiner cross block

Standard configuration and characteristics of "vacuum switch module" in V cabinet vacuum switch cross block

Capacitive voltage indicator of incoming bushing

Each chamber is equipped with a pressure gauge to monitor SF6 density

Lifting lug for lifting

Operating handle

Optional

Electric operating mechanism

Cable short circuit and ground fault indicator

Current transformer and meter

Remote monitoring and earth fault indicator