玉环玮斯电气有限公司

Model and significance

Technical parameters

Matched with load switch of 2/3 working positions 

The rigid-closing speed (within 5ms before rigid-closing) 2 3m/s 

The rigid-opening speed (within 10ms after rigid-opening) m3m/s 

Closing time: w 100ms 

Opening time: w 100ms 

Operating torque: w 120N.m 

Mechanical life: N5,000 times 

Mechanism weight: 20KG

           Drawing

Operating instructions

Mechanism energy storage

Install and fix the mechanism on the body, using a special operating handle, inserted into the upper part of the mechanism (closing operation axis), rotate clockwise about 120° , complete the spring energy storage of the mechanism, or electric operation motor is energized and stored.

Closing operation

Press the closing button or the electric operation closing coil to energize (the - energy storage spring) spring release mechanism to drive the body to close, the main circuit is turned on. Opening operation

Press the opening button or electrically operating the opening coil to energize, the spring releases the energy, and the mechanism drives the main circuit of the main body to open.

The grounding opening gate operation

Closing operation: The operating handle is inserted into the lower part of the mechanism (grounding operation axis), rotated clockwiseabout 90° , and the grounding circuit is closed under the action of spring force of the body mechanism

Opening operation: The operating handle is inserted into the lower part of the mechanism (grounding operation axis), rotated counterclockwise about 90 ° , and the grounding circuit is opened under the action of spring force of the body mechanism.

Notes on using environmental conditions

The ambient air temperature does not exceed 40P, and measured within 24 hours, minimum air temperature -40*C

Elevation W2000 m, shatter crack degree w8 degrees

In places where there is frequent and severe vibration, there are places where water vapor, gas, chemical corrosionsediment, salt spray, dust and dirt, which are obviously affecting the performance of the mechanism, and explosion and fire hazard environments are not suitable for use.